HIFI ELITE SPORT 4.0 - BLUETOOTH GUIDE

 

GENERAL BLUETOOTH PAIRING INSTRUCTIONS

 Power on the earbuds and enter Pairing Mode by holding the middle, multi-function button down (play/pause/power) for at least 8 to 10 seconds.  DO NOT LET GO WHEN YOUR HEAR "Power On."
 Hold the middle button until you hear "Pairing." 
 A red & blue LED light will flash once in Pairing Mode.
 Turn on the Bluetooth function of your desired device.  Scan until you see "HIFI ELITE" & select it.
 If done correctly, you will hear "Paired."
 Once a device is connected, the earbuds will automatically connect when powered on as long as the device has Bluetooth enabled and is within range.

SEE BELOW FOR DEVICE SPECIFIC GUIDES


PAIRING TELEVISIONS

 Your television must be Bluetooth enabled or have the ability to use an external Bluetooth Transmitter (sold separately) in order to connect with any Bluetooth devices including the HIFI ELITE Sport 4.0 earbu.
 Pairing a TV with the HIFI ELITE Sport 4.0 earbuds follows the same process as outlined above.  Please refer to your TV manual for instructions on operating the Bluetooth of your specific TV model.

Apple TV

 Use above instructions to put HIFI ELITE Sport 4.0 earbuds into Pairing Mode.
 On your Apple TV, go to Settings > Remotes and Devices > Bluetooth. ...
 Choose your Bluetooth accessory.
 If asked, enter a passkey or PIN. Use: 0000
 If you are still unable to pair your HIFI Elite Sport 4.0 with your Apple TV please visit  https://support.apple.com/en-us/HT205302 for further instructions & support from an Apple TV expert.